Crown Warm Air Furnaces

Crown oil furnaces provide you with performance and versatility. Currently, there are three series available: Hi-Boy / Lo-Boy / Horizontal/Counterflow

Hi Boy Warm Air Furnace

• Doe Output Range 70,500 To 117,600 BTU/HR
• 4 Sizes

Features:
Fully Packaged

Cabinet:
• Foil-faced fiberglass insulation reduces heat loss and noise
• Baked enamel finish for durability

Burner:
• High quality Beckett Flame retention burner with primary control

Controls:
• Readily available trade components
• 40 VA transformer
• Color coded wiring for easy service
• Transformer package and cooling fan relay are factory wired for easy add-on cooling installation
• Barometric Damper

Blower:
•Slide-out design
• 4 Speed PSG pre-lubricated motors with sealed bearings for low maintenance, maximum efficiency, and trouble-free performance
• Dynamically balanced blower with resilient motor mounts for smooth and quiet operation

Standard Equipment

Cabinet Construction:
Heavy gauge steel, Seal-Tite design, completely assembled at factory, leveling legs.
Finish:
Baked enamel for greater durability.
Burner:
Flame retention type. Shipped assembled in furnace.
Controls:
Cad cell primary control, combination blower and limit control.
A/C:
Ready for 4 Ton Cap.
Wiring:
All wiring factory connected.
Heater Exchanger:
Heavy 13 gauge hot rolled alloy steel. Visually hand-welded, inside and out.
Radiator:
"Wrap-around" type.
Barometric Damper
Blower:
Squirrel cage type. Permanently lubricated, resilient mounted.
Blower Motor:
Designed for heavy duty, continuous operation. Thermally protected.
Blower Assembly:
Entire unit with motor can be easily removed for servicing.
Filter Rack with Filters
Flue Collector Box:
Completely enclosed by cabinet.
Insulation:
Spun glass and aluminum foil for "hand cool" cabinet.
Access Door:
Easily removed for access to burner and controls. Completely encloses controls and burner.

Model CHB 68-112 is factory set for 105,000 BTU/HR input (.75 GPH).
All other sizes require a change of nozzle in the field

Lo Boy Warm Air Furnace

• Doe Output Range 69,700 to 116,200 BTU/HR
• 4 Sizes

Features:
Fully Packaged

Cabinet:
• Foil-faced fiberglass insulation reduces heat loss and noise
• Baked enamel finish for durability
Burner:
• High quality Beckett Flame retention burner with primary control
Controls:
• Readily available trade components
• 40 VA transformer
• Color coded wiring for easy service
• Transformer package and cooling fan relay are factory wired for easy add-on cooling installation
• Barometric Damper
Blower:
• Slide-out design
• 4 Speed PSG pre-lubricated motors with sealed bearings for low maintenance, maximum efficiency, and trouble-free performance
• Dynamically balanced blower with resilient motor mounts for smooth and quiet operation

Standard Equipment

Cabinet Construction:
Heavy gauge steel, Seal-Tite design, completely assembled at factory, leveling legs.
Finish:
Baked enamel coat for greater durability.
Burner:
Flame retention type. Shipped assembled in furnace.
Controls:
Cad cell primary control, combination blower and limit control.
A/C:
Ready for 4 Ton Cap.
Wiring:
All wiring factory connected.
Heater Exchanger:
Heavy 13 gauge hot rolled alloy steel. Visually hand-welded, inside and out.
Radiator:
"Wrap-around" type. Rear flue model have front clean-out port.
Barometric Damper
Blower:
Squirrel cage type. Permanently lubricated, resilient mounted.
Blower Motor:
Designed for heavy duty, continuous operation. Thermally protected.
Blower Assembly:
Entire unit with motor can be easily removed for servicing.
Filter Rack and Filters
Flue Collector Box:
Completely enclosed by cabinet (front flue models only).
Insulation:
Spun glass and aluminum foil for "hand cool" cabinet.
Access Door:
Easily removed for access to burner and controls. Completely encloses controls and burner.

Models CLBF 68-112 and CLBR 68-112 are factory set for 105,000 BTU/HR input (.75 GPH). All other sizes require a change of nozzle in the Field.

Specifications are subject to change without notice.

Horizontal Warm Air Furnace

• DOE Heating Capacities Output Range 70,500 To 99,900 BTU/HR
• 3 Sizes

Features:
Fully Packaged

Cabinet:
• Foil-faced fiberglass insulation reduces heat loss and noise
• Baked enamel finish for durability
Burner:
High quality Beckett Flame retention burner with primary control
Controls:
• Readily available trade components
• 40 VA transformer
• Color coded wiring for easy service
• Transformer package and cooling fan relay are factory wired for easy add-on cooling installation
• Barometric Damper
Blower:
• Slide-out design
• 4 Speed PSG pre-lubricated motors with sealed bearings for low maintenance, maximum efficiency, and trouble-free performance
• Dynamically balanced blower with resilient motor mounts for smooth and quiet operation

Standard Equipment:

Cabinet Construction:
Heavy gauge steel, Seal-Tite design, completely assembled at factory, leveling legs.
Finish:
Baked enamel for greater durability.
Burner:
Factory pre-wired, pre-assembled and tested. Constant ignition pressure atomizing type. Shipped assembled in furnace. Ready to connect to fuel supply line after proper setup procedure
Controls:
Cad cell primary control, combination blower and limit control.
A/C :
Ready for 4 Ton Cap.
Wiring:
All wiring factory connected, installed and tested ready to connect to house wiring.
Heater Exchanger:
Heavy 13 gauge hot rolled alloy steel. Visually hand-welded, inside and out.
Radiator:
"Wraparound" type.
Blower:
Multispeed, Direct Drive. Permanently lubricated, resilient mounted.
Blower Assembly:
Designed for heavy duty, continuous operation. Thermally protected.
Insulation:
Spun glass and aluminum foil for "hand cool" cabinet.
Barometric Damper

Model CHC 68-96 is factory set for 105,000 BTU/HR input (.75 GPH). All other sizes require a change of nozzle in the field.
Standard left hand warm air supply for Horizontal configuration.

Return to Top

Email: HVAC@DanielsOil.com